Toshiba Tosvert VF-S15 User Manual

E6582175
F-39
6
For details about analog signal setting, refer to section 7.3.
1) 0-10Vdc voltage input adjustment (VIA, VIB terminals)
A
djust the frequency command for
the voltage input by setting the two
points.
/
100 (%)
10V voltage signal
/
0 ( Hz)
/
0 (%)
0
/
50/60 (Hz)
Frequency commnd


2) 4-20mAdc current input adjustment (VIC terminal)
A dju st t he fr eq ue nc y c om m and f or th e
cu rr en t in pu t b y s ettin g the t wo po ints.
Set  to  in cas e o f a cu rr e nt
in pu t o f 0 to 2 0 m A.


10 0 ( % )
20mA current signal

0 ( Hz)

2 0 (%)
4mA

50 /60 ( H z)
Frequency commnd
3) -10-+10 Vdc voltage input adjustment (VIB terminal)
A
djust the frequency
command for the voltage
input by setting the two
points.

50/60 (Hz)

100(%)
10V voltage signal
-100(%)
-10V

f213
50/60 (Hz)


Forward run
Reverse run
0(Hz)
0(%)

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)