Choose the
menu XNCP→XNCP"XRP→XNCP"Ocrrkpi to load the following page.
Figure 6-13 Create VLAN Mapping Entry
The following entries are displayed on this screen:
" XNCP"Ocrrkpi"Eqphki"
E"XNCP<"
Enter the ID number of the Customer VLAN. C VLAN refers to the
VLAN to which the packet received by switch belongs.
UR"XNCP<"
Enter the ID number of the Service Provider VLAN.
Fguetkrvkqp<"
Give a description to the VLAN Mapping entry or leave it blank.
" XNCP"Ocrrkpi"Vcdng"
E"XNCP"Ugngev<"
Click the Ugngev button to quick-select the corresponding entry
based on the C VLAN ID you entered.
Ugngev<"
Select the desired entry to delete the corresponding VLAN
Mapping entry. It is multi-optional.
Qrgtcvkqp<"
Click the Gfkv"button to modify the settings of the entry and click
the Oqfkh{"button to apply.
80905"Rqtv"Gpcdng"
On this page, you can enable the port for the VLAN Mapping function. Only the port is enabled,
can the configured VLAN Mapping function take effect.
77
To Next Page
Loading...
