Chapter 2 Configure Touch P5 as a Router
42
Computer
• To download, launch a web browser and type the server address
ftp://<W
AN IP address of your
T
ouch P5>:<por
t number>
(such as ftp://59.40.2.243:21) or ftp://<domain name of your Touch P5>:<port
number> (such as ftp://MyDomainName:21) in the address bar, and
then press Enter on the keyboard.
• To upload, use a third-party app for network files management.
Pad
• Use a third-party app for network files management.
Note: Click DDNS to learn how to set up a domain name for your Touch P5.
Customize Your Settings
By default, Share All is enabled so all contents on the USB disk are shared. If you want
to only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, and then log in with the username and password you set
for your Touch P5.
2. Go to Basic > USB Settings > Sharing Access.
3. Focus on the section of Folder Sharing. Click the button to disable Share All, and
then click Add to add a new sharing folder.
4. Tick Enable Authentication. If you allow network clients to modify this folder, tick
Enable Write Access.
5. Click OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
