TPT Wirebonder www.tpt.de Page 35 of 53 September 2016
31. Optional Software "Add Bond" for automatic Security Bond
The Add Bond Menu can combine two bonds with a distance in between.
Bumps or Wires are possible.
Add Bond menu:
This program is only active if you are in the Add Bond menu
Semi Automatic or Automatic:
With Semi Automatic it is possible to adjust the position of the every bond. With Automatic 1.Bond Program and 2.
Bond Program will be performed complete at once.
Direction:
The direction specifies in which direction the way will move. In front of the first bond or behind the first bond.
Distance:
The distance is the way between the first bond of the 1.bond program and the first bond of the 2. Bond program
To Next Page
Loading...