Trimble 5700 - Page 206

Index
206 5700/5800 GPS Receiver User Guide
A
accuracy
centimeter-level 18, 122
submeter-level 18, 122
Actual Track Made Good Over and Speed
Over Ground message 193
adding frequencies for internal radio 85, 157
ANT port 26, 204
antenna information, default 96, 167
antenna power adapter 107
Antenna record, in application file 63, 145
antennas
electrical interference 28, 129
mounting 28, 129
RPA 38
rubber duck 32, 38
using with the 5700 receiver 107
whip 32, 38
Zephyr 33
Zephyr Geodetic 33
application files
applying 68, 148
configuring the receiver with 145
Current (Current.cfg) 64, 94, 146,
166
Default (Default.cfg) 64, 94, 146, 166
deleting 49, 137
deleting by formatting CompactFlash
card 54
editing in Configuration Toolbox
software 80, 152
maximum number 64, 146
naming 68, 148
overview 63, 145
Power Up (Power_Up.cfg) 65, 94,
147, 166
records 63, 145
storing 68, 148
timed 50, 66, 100
using to configure 1PPS output 117
applying application files 68, 148
ASCII
output, default settings 95, 167
time tags, default 95
time tags, definition 115
B
backpack setup 38
base station See reference station
baseline, moving 178
batteries
camcorder 43
charging in reference and rover
receiver at the same time 56
charging while in 5700 receiver 55
charging with TSCe/TSC1
batteries 57
minimum power to charge 56
operating time 54, 90, 162
standby 51
battery
compartments 24, 27, 129
inserting in the 5800 receiver 130
Battery LEDs 51
baud rate
default 95, 167
maximum 92, 164
binary output, default settings 95, 167
blue RPA cable 26, 204
blue TNC port 26, 204
Bluetooth 3
bottom panel 27, 129
bracket
insert 34
receiver 34, 35
RPA 32
breakout box, on event marker/1PPS
cable 105
buttons 23, 48, 126, 137