Triumph Speed Triple RS User Manual

Maintenance
100
To inspect the oil level:
• Start the engine and run at idle for
approximately five minutes.
• Stop the engine and wait for three
minutes to allow the oil to settle.
• With the motorcycle upright, re-
move the filler plug/dipstick, wipe
the blade clean.
• Replace and screw closed the filler
plug/dipstick.
• Remove the filler plug/dipstick.
• The oil level is indicated by lines on
the filler plug/dipstick. When full,
the indicated oil level must be level
with the upper marking on the dip-
stick.
• If the oil level is below the lower
marking, add oil a little at a time
until the correct level is reached.
Once the correct level is reached,
refit the filler plug/dipstick.
Engine Oil and Oil Filter Change
Warning
Prolonged or repeated contact with
engine oil can lead to skin dryness, irri-
tation and dermatitis. In addition, used
engine oil contains harmful contamina-
tion that can lead to skin cancer.
Always wear suitable protective cloth-
ing and avoid skin contact with used
oil.
Warning
The oil may be hot to the touch. Avoid
contact with the hot oil by wearing
suitable protective clothing, gloves, eye
protection, etc. Contact with hot oil
may cause the skin to be scalded or
burned.
The engine oil and filter must be re-
placed in accordance with scheduled
maintenance requirements.
21
1. Oil filter
2. Oil drain plug

Triumph Speed Triple RS Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, inline 3-cylinder
Engine Capacity	1160 cc
Max Torque	125 Nm @ 9, 000 rpm
Transmission	6-speed
Seat Height	830 mm
Weight	198 kg (wet)
Max Power	180 PS (132.4 kW) @ 10, 750 rpm
Rear Suspension	Ohlins TTX36 twin tube monoshock, fully adjustable
Front Brakes	Brembo Stylema, 320 mm twin disc
Rear Brakes	Brembo single piston caliper, single 220 mm disc
Fuel Tank Capacity	15.5 litres
Front Suspension	Öhlins 43mm NIX30 upside down forks, fully adjustable