123
To change the rebound damping force:
• Rotate the slotted adjuster clock-
wise to increase, or anticlockwise to
decrease.
• Always count the number of anti-
clockwise turns from the fully
clockwise position and set both
forks to the same settings.
Note:
• The motorcycle is delivered from
the factory with the rebound set at
2.5 anticlockwise turns from the
fully clockwise position.
Rebound Damping Adjustment -
Speed Triple RS
The rebound damping adjuster is locat-
ed at the top of the right hand fork.
1
1. Rebound damping adjuster
To change the rebound damping force:
• Rotate the adjuster clockwise to in-
crease, or anticlockwise to decrease
using a 3 mm Allen key.
• Always count the number of clicks
from the fully clockwise position
noting that the first stop (click po-
sition) is counted as zero.
Note:
• The motorcycle is delivered from
the factory with the rebound set at
16 clicks from the fully clockwise
position.
Compression Damping Adjustment -
Speed Triple S
The compression damping adjuster is lo-
cated near the bottom of both forks,
adjacent to the wheel spindle.
1
1. Compression damping adjuster
To change the compression damping
force:
• Rotate the slotted adjuster clock-
wise to increase, or anticlockwise to
decrease.
• Always count the number of anti-
clockwise turns from the fully
clockwise position and set both
forks to the same settings.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 2 anticlockwise
turns from the fully clockwise posi-
tion.
To Next Page
Loading...
Need help?
General
