Triumph Speed Triple RS User Manual

Cleaning and Storage
146
After Washing
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a pro-
prietary brand of oil-free brake disc
cleaner.
Remove the plastic bags and tape, and
clear the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle oper-
ation.
Use a dry cloth or chamois leather to
absorb water residue. Do not allow wa-
ter to stand on the motorcycle as this
will lead to corrosion.
Start the engine and run it for 5 min-
utes. Make sure that there is adequate
ventilation for the exhaust fumes.
Care of Gloss Paintwork
Gloss paintwork should be washed and
dried as described above, then protect-
ed using a high quality automotive
polish. Always follow the manufacturer’s
instructions and repeat regularly to
maintain your motorcycle’s appearance.
Care of Matt Paintwork
Matt paintwork requires no greater care
than that already recommended for
high gloss paintwork.
• Do not use any polish or wax on
matt paintwork.
• Do not try and polish out scratches.

Triumph Speed Triple RS Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, inline 3-cylinder
Engine Capacity	1160 cc
Max Torque	125 Nm @ 9, 000 rpm
Transmission	6-speed
Seat Height	830 mm
Weight	198 kg (wet)
Max Power	180 PS (132.4 kW) @ 10, 750 rpm
Rear Suspension	Ohlins TTX36 twin tube monoshock, fully adjustable
Front Brakes	Brembo Stylema, 320 mm twin disc
Rear Brakes	Brembo single piston caliper, single 220 mm disc
Fuel Tank Capacity	15.5 litres
Front Suspension	Öhlins 43mm NIX30 upside down forks, fully adjustable