114
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS equipped brake system. In
this situation, braking too hard will
cause the wheels to lock resulting in
loss of control and an accident.
Reduce speed and do not continue to
ride for longer than is necessary with
the indicator light illuminated. Contact
an authorised Triumph dealer as soon
as possible to have the fault checked
and rectified.
Inspect the level of brake fluid in both
reservoirs and change the brake fluid in
accordance with scheduled mainte-
nance requirements. Use only DOT 4
fluid as recommended in the Specifica-
tion section. The brake fluid must also
be changed if it becomes, or is suspect-
ed of having become contaminated with
moisture or any other contaminants.
Note:
• A special tool is required to bleed
the ABS braking system. Contact
your authorised Triumph dealer
when the brake fluid needs renew-
ing or the hydraulic system
requires maintenance.
Brake Fluid Level Inspection and
Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorised
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake perfor-
mance potentially leading to loss of
motorcycle control and an accident.
Front Brake
The brake fluid level in the reservoirs
must be kept between the MIN and MAX
level lines (reservoir held horizontal).
1
2
3
1. Cap retaining screws
2. MAX level line
3. MIN level line
To Next Page
Loading...
Need help?
General
