62
The cruise control buttons are located
on the left hand switch housing and can
be operated with minimum movement
by the rider.
1
2
1. Cruise control RES/+ button
2. Cruise control SET/- button
Cruise control can be switched on or off
at any time but it cannot be activated
until all the conditions described on
page 62 have been met.
Activating Cruise Control
To turn on the cruise control system,
press the SET/- button. The cruise con-
trol symbol will be shown in the display
screen. The cruise control set speed will
be shown as ‘--’ indicating that a speed
has not yet been set.
To activate cruise control, the following
conditions have to be met:
• The motorcycle must be travelling
at a speed between 19 to 100 mph
(30 to 160 km/h).
• The motorcycle must be in 3
rd
gear
or higher.
• Once these conditions have been
met, press the SET/- button to acti-
vate cruise control. The cruise
control symbol will be shown in a
green light in the TFT display to in-
dicate that cruise control is now
active.
The word SET will be shown next to the
cruise control symbol. The cruise control
set speed will be shown and the cruise
control light will illuminate in the ta-
chometer indicating that cruise control
is active.
25.2
F
E
TRIP
mi mp/hHH:MM
PM
SET
58
mp/h
10
5
8
5
12
1. Cruise control symbol
2. Cruise control set indicator
3. Cruise control set speed
The cruise control system will maintain
the set speed until:
• The set speed is adjusted as de-
scribed on page 63.
• Cruise control is deactivated as de-
scribed on page 63.
To Next Page
Loading...
Need help?
General
