Triumph Speed Triple RS User Manual

Maintenance
142
Caution
To avoid cable damage, do not pull the
bulb holder using the cables. Pull only
on the bulb holder.
• Carefully remove the bulb holder
from the back of the license plate
light unit. Remove the bulb.
12
1. License plate light
2. Bulb holder
Installation is the reverse of the removal
procedure, noting the following:
• Tighten the lamp fixing to 2 Nm.
• Reconnect the battery, positive
(red) lead first.
• Refit the front panel and tighten
the side fixings to 2 Nm.

Triumph Speed Triple RS Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, inline 3-cylinder
Engine Capacity	1160 cc
Max Torque	125 Nm @ 9, 000 rpm
Transmission	6-speed
Seat Height	830 mm
Weight	198 kg (wet)
Max Power	180 PS (132.4 kW) @ 10, 750 rpm
Rear Suspension	Ohlins TTX36 twin tube monoshock, fully adjustable
Front Brakes	Brembo Stylema, 320 mm twin disc
Rear Brakes	Brembo single piston caliper, single 220 mm disc
Fuel Tank Capacity	15.5 litres
Front Suspension	Öhlins 43mm NIX30 upside down forks, fully adjustable