46
Display Set Up - Set Units
There are different units of measure-
ment options that can be shown in the
display screen.
To select the units of measurement re-
quired:
• From the Display Set Up menu,
push the joystick down to select
SET UNITS and press the joystick
centre to confirm.
• Push the joystick down/up to select
the required unit; DISTANCE and
ECONOMY, TEMPERATURE or PRES-
SURE.
• Push the joystick down/up to select
the required unit of measurement
from the following options:
– DISTANCE and ECONOMY:
– MILES and MPG (UK)
– MILES and MPG (US)
– KM and L/100KM
– KM and KM/L
– TEMPERATURE:
– °C
– °F
– PRESSURE:
– PSI
– BAR
– KPa
• Press the joystick centre to con-
firm.
Display Set Up - Set Clock
This function allows the adjustment of
the clock.
To set the clock:
• From the Display Set Up menu,
push the joystick down to select
SET CLOCK and press the joystick
centre to confirm.
• Push the joystick down/up to select
between either 12 HR or 24 HR
clock and press the joystick centre
to confirm selection. The clock will
display in either 12 or 24 hour for-
mat. Once the clock format is set
the display will return to the SET
CLOCK menu.
To set the time, push the joystick down/
up to select HOUR or MINUTE.
To adjust the hour setting:
• Select HOUR on the display and
press the joystick centre, a tick will
appear next to HOUR and the hour
display will flash as shown below.
• Push the joystick down/up to set
the hour and press the joystick
centre to confirm.
To Next Page
Loading...
Need help?
General
