UniPOS FS5200E - Page 47

UniPOS Fire Extinguishing Control Panel FS5200Е
Instruction Manual Page 47
Revision 7/06.12 of 63
13.4.1.1. The value of the parameter
Network Address defines uniquely the fire
extinguishing control panel within the
established network of remote control panels
and repeaters.
A screen for entry of the data
appears in setting (entry) of a network
address.
The permissible values of the network
address are from 0000 to 9999.
The value of the default parameter is
„1234”.
1 2 3
Use:
 button (Down) – to change the character;
 button (Up) – to move to the next character;
 button (Menu) – for confirmation;
 button (Exit).
When the parameter is changed and the new value is saved with the button a text
message “Saved!” appears! Exit – [x]”.
13.4.1.2. To set ON or OFF RS485 Network
Parameter permits values ON of OFF
Active buttons :
 to change - buttons and
;
 to save the change - button
(„Menu”);
 to exit press - button („Exit”).
13.4.1.3. The fire extinguishing control panel
supports menus and screens in two of three
languages:
- Bulgarian;
- English;
- Russian.
Use the buttons (Down) and
(Up) for alternating change of the
language, confirm the new value of the
parameter using the button and the
button to exit it.
1 2 3
When the parameter is changed and the new value is saved with the button a text
message “Saved!” appears! Exit – [x]”. The fire extinguishing control panel is factory set to English
language.