Unipulse F381A - SD Memory Card Error Handling

122
6 SYSTEM SETTINGS
122
SYSTEM SETTINGS
Chapter
6
- Language
Select language.
Operation
Setting range (Japanese (日), English (英))
Main screen→Setting→First Setting→System Setting→Language
- Work Setting Parameter Protection
Set whether or not work setting parameters can be changed.
Operation
Setting range (Not Protect, Protect)
Main screen→Setting→First Setting→System Setting→Work Protect
- First Setting Parameter Protection
Set whether or not first setting parameters can be changed.
Operation
Setting range (Not Protect, Protect)
Main screen→Setting→First Setting→System Setting→First Protect
- Initialization
Parameters are brought back to factory defaults.
Setting range
First Setting:
All the set values of the first setting
parameters other than the equipment's
specific settings
Work Setting: All work setting parameters
All: First Setting + Work Setting
(The F381A's specific settings are the set values marked with * in "9-2 Setting
Operation
item list" on p.142.)
Main screen→Setting→First Setting→System Setting→Initialization
- Self-Check
Make self-checks.
Operation
Main screen→Setting→First Setting→System Setting→Self-Check