132
7 OPTION
132
OPTION
Chapter
7
■Error Release
When an error is displayed, release the error by this function.
If such an error is displayed, SD memory card processing cannot be performed until it is released.
Also, the SD memory card error cannot be released with on the Main screen.
1. Press .
Setting range
Only Release: Processing resumes if the SD
memory card is in normal condition
when the error is released during
Measurement Waveform Preservation
by the Automatic Operation.
Annul Data: The data that are about to be written on the present SD memory
card are annulled to release the error when it occurs during
Measurement Waveform Preservation by the Automatic
Operation.
Main screen→Setting→First Setting→Option Setting →SD Card→Error Release
2. Press to release the present error.
- SD memory card error release flow during Measurement Waveform Preservation
by the Automatic Operation
SD memory card in normal condition (waiting for processing)
Resumption of the SD memory card processing
SD memory card in processing
Occurrence of an error
Elimination of the cause of the error
Only Release Annul the Current Data
Not to preserve the data
To preserve the data
The cause of the error
The cause of
Selective items with
in processing
the error is not
completely eliminated.
is completely eliminated.
in processing
To Next Page
Loading...
