Unipulse F381A - Adjustment of Waveform Display

54
4 SETTINGS AND CALIBRATIONS
54
SETTINGS AND CALIBRATIONS
Chapter
4
4-7. Adjustment of waveform display
Adjust the waveform display axis by Display Range Setting.
Operation
Main screen→Setting→Work Setting→Display Setting
1. Y-axis Start Point
Set the Y-axis start point of the waveform.
Operation
Setting range (-10000 to 10000)
Main screen→Setting→Work Setting→Display Setting→Y Start Point
2. Y-axis End Point
Set the Y-axis end point of the waveform.
Setting range
(Y-axis start point +
25, 50, 100, 200, 300, 400, 500, 1000, 2000, 3000,
Operation
4000, 5000, 10000, 20000)
Main screen→Setting→Work Setting→Display Setting→Y End Point