137
8 SPECIFICATIONS
137
SPECIFICATIONS
Chapter
8
■Options
SD card slot [SDC]
All parameters can be preserved and reconstructed.
All comparison waveforms can be preserved and reconstructed.
Measurement waveforms and judgment points can automatically be
preserved.
* An SD card of 1GB is attached.
Approx. 80 waveforms can be preserved by 1MB.
DeviceNet interface [ODN]
Connectable with DeviceNet-compliant OMRON CompoBus/D
seamlessly.
All parameters can be read and written.
All comparison waveforms can be read and written.
Measurement waveforms and judgment points can be read.
CC-Link interface [CCL]
Directly linkable with a Mitsubishi (multipurpose) sequencer.
All parameters can be read and written.
Judgment points can be read.
Ethernet interface [ETN]
Applicable standards IEEE802.3u (100 Base-TX)
IEEE802.3 (10 Base-T)
Supported protocols TCP/IP, ICMP
All parameters can be read and written.
All comparison waveforms can be read and written.
Measurement waveforms and judgment points can be read.
■General performance
Power supply voltage DC24V (±15%)
Power consumption 20W max
Inrush current (Typ) 2A, 10msec (at ordinary temperature, cold-start)
Operating conditions Temperature; Operating temperature range -10℃ to +40℃
Storage temperature range -20℃ to +60℃
Humidity; 85%RH or less (non-condensing)
Outside dimensions 96W×96H×117.3D［mm］(not including projections)
Panel-cut dimensions 92 ×92 [mm]
Panel thickness 1.6 to 3.2 [mm]
Weight Approx. 1.0kg
In addition to the SD card slot, one of the DeviceNet interface, CC-Link interface
and Ethernet interface functions can be mounted.
Point
To Next Page
Loading...
