Unipulse F381A - 6 System Settings; System Setting

121
6 SYSTEM SETTINGS
121
SYSTEM SETTINGS
Chapter
6
6-1. System setting
Select language and adjust contrast, etc., by System Setting.
Operation
Main screen→Setting→First Setting→System Setting
- Backlight
This function changes the brightness of the backlight when touch screen
has not been used for certain period of time.
The ON time ( lighting time of the backlight) and the Low time ( bright
→dark switching time of the backlight) are set up.
When you use it in the state which a display is always in sight, set the
ON time to 0 minutes.
When you want the backlight always bright, set 0 minutes for both the ON time and the Low time.
The backlight is turned bright by touching the panel when the backlight is turned off or it is dark.
Ex.) Set 60 minutes to ON time, 10 minutes to Low time.）
Operation
Setting range (0 to 99 minutes) (with both time)
Main screen→Setting→First Setting→System Setting→Backlight
6 SYSTEM SETTINGS
Bright Dark
10 min.
60 min.
Light Out