Unipulse F381A - 5 COMMUNICATIONS; 5-1. RS-232 C Communication

81
5 COMMUNICATIONS
81
COMMUNICATIONS
Chapter
5
5-1. RS-232C
■Outline
- Results can be read.
- Hold results can be read.
- Measurement waveforms can be read.
- Comparison waveforms can be read and written.
- Set values can be read and written.
- Wave Nos. can be read and written.
- Hold results can be automatically output upon completion of measurement.
- The communication check function is included.
(See "■Communication establishment procedure"on page 23 (2-4.RS-232C Connection))
■RS-232C setting
Make RS-232C communication settings by Communication Setting.
Operation
Main screen→Setting→First Setting→Com. Setting
- Transmission Speed
Setting range
Operation
(1200, 2400, 4800, 9600, 19.2k, 38.4k bps)
Main screen→Setting→First Setting→Com. Setting→Speed
- Data Bit
Operation
Setting range (7, 8 bit)
Main screen→Setting→First Setting→Com. Setting→Data Bit
5 COMMUNICATIONS