Unipulse F381A - Page 91

82
5 COMMUNICATIONS
82
COMMUNICATIONS
Chapter
5
- Stop Bit
Operation
Setting range (1, 2 bit)
Main screen→Setting→First Setting→Com. Setting→Stop Bit
- Parity Bit
Operation
Setting range (None, Even, Odd)
Main screen→Setting→First Setting→Com. Setting→Parity Bit
- Delimiter
Operation
Setting range (CR, CR+LF)
Main screen→Setting→First Setting→Com. Setting→Delimiter
- Header
Operation
Setting range (None, STX)
Main screen→Setting→First Setting→Com. Setting→Header
- Flow Control
Operation
Setting range (Off, RTS/CTS Control)
Main screen→Setting→First Setting→Com. Setting→Flow Control
- Communication Mode
Operation
Setting range (Normal, Hold Point Mode)
Main screen→Setting→First Setting→Com. Setting→Com. Mode