126
6 SYSTEM SETTINGS
126
SYSTEM SETTINGS
Chapter
6
1. Press / on the numeric keypad to flash the place you want to set.
Each time you press / , the flashing place changes as Year → Month → Day →
Hour → Minute → Second → Year → ...
2. Input a numeric value.
Input all of Year/Month/Day/Hour/Minute/Second in two digits.
Year: 00 to 79 (last two digits of year)
Month: 01 to 12
Day: 01 to 31 (The last day changes according to the set month.)
Hour: 00 to 23 (24-hour display)
Minute: 00 to 59
Second: 00 to 59
3. Press .
Year
2000/01/01/ 01:23:55
Month Day Hour Minute Second
To Next Page
Loading...
