34
3 SCREENS AND OPERATIONS
34
SCREENS AND OPERATIONS
Chapter
3
- About the waveform display
Comparison waveforms (HI and LO limits):
The comparison waveforms set by Waveform Comparison Setting are displayed in blue only in
the Compare Area. Since the comparison waveforms are not displayed outside the Compare
Area, the Compare Area can be seen at a glance.
Waveform comparison judgment point:
Indicates in red the point at which the HI/LO limit of comparison waveforms is first exceeded.
Reference Point of Relative Comparison:
Indicated by a yellow dot and line when Relative Comparison is made.
- About the section display
Clear indication of sections: Sections are separated by color for ease of understanding.
Sections 1, 3, and 5: Shaded in gray.
Sections 2 and 4: Shaded in green.
Hold judgment point:
Judgment point(s) (hold point(s)) of each section, if any, is indicated by a yellow dot. However,
at a “Peak to Peak” section, the minimum value is indicated in pink, and the maximum value is
indicated in yellow.
Comparison
Comparison
Reference Point
Waveform comparison
Compare Area
Compare Area
Comparison
Comparison
Outside the Compare AreaOutside the Compare Area
waveform (HI limit)
waveform (LO limit)
waveform (HI limit)
waveform (LO limit)
of Relative Comparison
judgment point
Load/displacement
Hold judgment point
Sct.2
Sct.1 Sct.3
Hold judgment point
(minimum value)
Time or displacement （Front）
S
P
E
P
S
P
S
P
E
P
E
P
Sct.2Sct.3 Sct.1Displacement （Back）
E
P
S
P
E
P
E
P
S
P
S
P
SP:Start point
EP:End point
HI and LO limits
To Next Page
Loading...
