EU Declaration of Incoporation in accordance with ISO/IEC 17050-1:2010
Model UR3, UR5, UR10 with CB3 control box (UR3/CB3, UR5/CB3,
UR10/CB3)
Serial Number Starting 20183000000 and higher --- Effective 1 January 2018
Incorporation: Universal Robots (UR3, UR5, and UR10) shall only be put into
service upon being integrated into a final complete machine
(robot system, cell or application), which conforms with the
provisions of the Machinery Directive and other applicable
Directives.
It is declared that the above products, for what is supplied, fulfil the following Directives as
Detailed Below:
IMachine Directive
2006/42/EC
The following essential requirements have been fulfilled: 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2, 1.5.6,
1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has
been compiled in accordance with Part B of Annex VII of the
Machinery Directive.
IILow-voltage Directive
2014/35/EU
Reference the LVD and the harmonized standards used below.
IIIEMC Directive
2014/30/EU
Reference the EMC Directive and the harmonized standards
used below.
IVRoHS Directive
2011/65/EU
Reference the RoHS Directive 2011/65/EU.
V WEEE Directive
2012/19/EU.
Reference the WEEE Directive 2012/19/EU.
Reference to Harmonized
Standards Used:
(I) EN ISO 10218-1:2011 as applicable,(I) EN ISO 12100:2010
(I) EN ISO 13732-1:2008, (I) EN ISO 13849-1:2008 & 2015*
*Note: From the 2008 to the 2015 editions, there are no changes
relevant to our robots TUV Nord Certificate 4478014097602
(I) EN ISO 13849-2:2012, (I) EN ISO 13850:2015
(I) EN 1037:1995+A1:2008, (I) EN ISO 13850:2015
(II) EN 60320-1:2001/ A1:2007, (II) EN 60204-1:2006/ A1:2010
(II) EN 60529:1991/ A2:2013
(II) EN 60664-1:2007, (II) EN 60947-5-5:1997/ A11:2013
(II) EN 61000-6-2:2005, (II) EN 61140:2002/ A1:2006
(III)EN 61000-6-4:2007/ A1:2011, (III)EN 61131-2:2007
UR10 58 User Manual
Copyright © 2009–2020 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
