Reference to Other Technical
Standards and Specifications
Used:
(I) ISO/TS 15066 as applicable
(II) IEC 61784-3:2010 [SIL2]
ISO 14664-1:2015 Class 5 for control assembly with enclosure
and Class 5 for UR3, UR5 and UR10 manipulators
(II) IEC 60664-5:2007
(III) IEC 60068-2-27:2008, (III) IEC 60068-2-1:2007
(III) IEC 60068-2-2:2007, (III) IEC 61326-3-1:2008
The manufacturer, or his authorized representative, shall transmit relevant information about
the partly completed machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas,
certificate #DK008850.
User Manual 59 UR10
Copyright © 2009–2020 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
