Sending Functions
6-33
6
4 Place the originals on the platen or in the document
processor.
5 Click the Scan button.
The document data is scanned.
Imaging Color Settings This setting specifies the type of color for the image.
Resolution This setting specifies the dpi (dots per inch), or sharpness, for the image.
Image Quality This setting specifies the overall image quality. Make sure your selection
matches the original that you are scanning.
Exposure Level This setting specifies the sharpness and clarity of the image. If the Auto
check box is selected, then the slider bar and edit box are unavailable, and
the exposure level is automatically set to the default setting.
Contrast This setting specifies the contrast between light and dark areas of the
image. This feature cannot be used when Black & White is selected in the
Color Settings.
Advanced Reverse Image This setting prints images like a photo negative, reversing the black and
white areas of the image.
Prevent Bleed-
through
This setting prevents the image on one side of the paper from showing
through to the other side when printed.
Scan Profiles This is used to check current settings and store frequently used settings.
When the Configuration button is clicked, a setting screen opens with
buttons for Add, Edit, and Delete.
Add The current settings can be saved as a Scan Profile.
Edit The name and comments of the selected Scan Profile can be changed.
Delete Delete saved Scan Profiles.
Item Detail
To Next Page
Loading...
