Document Box
7-4
Storing Documents (Store File)
The procedure for storing documents in a custom box is explained below.
1 Press the Document Box key.
2 Place the originals in the document processor or on
the platen.
3 Press [Custom Box], select the box where the
document will be stored and then press [Store File].
4 Select the type of originals, scanning density, etc.,
as necessary.
For the features that can be selected, refer to
Document Store features on page 7-4.
5 Press the Start key. The original is scanned and the
data is stored in the specified Custom Box.
Document Store features
The features below can be selected when saving a document.
Storing Size
Select size of image to be stored.
NOTE: Enter up to 32 characters as the file name.
• Original Size (page 6-2) • Density (page 6-18) • Zoom (page 6-6)
• Mixed Size Originals (page 6-8) • Original Image (page 6-17) • Centering (page 6-7)
• 2-sided/Book Original (page 6-
10)
• Scan Resolution (page 6-19) • Border Erase (page 6-25)
• Original Orientation (page 6-11) • Color Selection (page 6-22) • Continuous Scan (page 6-23)
• Storing Size (page 7-4) • Sharpness (page 6-20) • Job Finish Notice (page 6-36)
• Prevent Bleed-thru (page 6-24) • Background Density Adj.
(page 6-21)
• File Name Entry (page 6-27)
Item Description
Standard Sizes 1 Select from Same as Original Size, A3, A4, A5, A6, B4, B5, B6,
Folio or 216 × 340 mm.
Standard Sizes 2 Select from Ledger, Letter, Legal, Statement, 11 × 15", Oficio II, 8K
or 16K.
Others Select from Hagaki or Oufuku hagaki.
To Next Page
Loading...
