Default Setting (System Menu)
9-15
9
Paper Output
Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
Use the procedure below to select the output tray.
1 Press the System Menu key.
2 Press [Common Settings] and then [Next] of Paper Output.
3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
4 Select the Output Tray.
Output Tray Descriptions
Inner Tray*
* This cannot be selected when the optional document finisher is installed.
Delivery on the Inner Tray of the machine.
Job Separator Tray Delivery to the job separator tray.
Finisher Tray Delivery to the tray of the optional document finisher.
NOTE: The optional document finisher is required.
FAX RX data output can be specified when the optional fax kit is installed.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
NOTE: FAX Port 1 appears when the optional fax kit is installed.
If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit
(Dual FAX).
To Next Page
Loading...
