Default Setting (System Menu)
9-91
9
Activating/Deactivating Application
To use an application, set the application to Activate.
Use the procedure below to start using an application.
1 Press the System Menu key.
2 Press [ ] and then [Application].
3 Select the desired application and press [Activate].
You can view detailed information on the selected application by pressing [Detail].
4 Enter the license key and press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 5.
To use the application as a trial, press [Trial] without entering the license key.
5 When the confirmation screen appears, press [Yes].
Launching Applications
You can launch any application for which Activate is set.
Use the procedure below to launch an application.
1 Press the Application key.
A list of available applications appears on the touch panel.
2 Press the key for the application to be launched.
The application starts up.
3 To exit the application, press [✕].
4 When the application exit confirmation screen appears, press [Yes].
NOTE: If the user authentication screen appears, enter your login user name and password and then press
[Login]. For this, you need to login with administrator privileges. The login user name and login password are
both set to "2500" in the factory default state.
NOTE: To exit an application, press [Deactivate].
CAUTION: If you change the date/time while using an application, you will no longer be able to use the
application.
CAUTION: The procedure for exiting some applications may differ.
To Next Page
Loading...
