Options vacon • 107
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
8
8.5 Flange adapter
VACON
®
100 X is an IP66/Type 4X outdoor drive, designed to be installed as close as possible to the
motor, minimizing the use of electrical rooms, integrating the drive as part of the machine, without
the use of cabinets.
VACON
®
100 X drives are products than can be mounted directly onto the motor, machine or wher-
ever the most efficient location for the drive is. This solution allows the machine designer, to use
the available space in and around the machine, optimally. A decentralised solution provides a more
flexible solution as an OEM manufacturer can deliver its machine in one piece, and there is no need
to install the drives in a separate location. See the MM4 flange adapter in Figure 82.
Figure 82. Flange adapter for MM4.
These flange adapters can be used, for example, with the following motor types:
• B3 - Foot mounting
• B34 - Foot - B14 face mounting
• B35 - Foot - B5 flange mounting
Compared to a traditional solution, with the AC drives located in an electrical room, a decentralised
solution offers significant savings potential in cabling and installation costs. By locating the drive
near the machine or onto the motor, the length of the motor cable will be minimized.
ENC-QMMF-MM04 flange adapter can be used with 5 different motor sizes while both ENC-QMMF-
MM05 and ENC-QMMF-MM06 flange adapters can be connected only to 3 different motor sizes. See
Table 41 for further details.
To Next Page
Loading...
