Power cabling vacon • 37
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
4
For important information on the requirements of the grounding conductor, see standard Underwriters’ Lab-
oratories UL508C.
For the correction factors for each temperature, see the instructions of standard Underwriters’ Laboratories
UL508C.
4.4.3 Brake resistor cables
VACON
®
100 X AC drives are equipped with terminals for an optional external brake resistor. These
terminals are marked with DC+/R+ and R-. See Table 31 and Table 32 for the resistor ratings.
4.4.4 Control cables
For information on control cables see chapter Control unit.