Vacon 100 X Installation, Technical And Maintenance Manual

Receipt of delivery vacon • 19
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
2
2.4.2 Frame MM5
2.4.3 Frame MM6
Table 6. Content of accessory bag, MM5.
Item Quantity Purpose
STO terminal connector 1
Six pin black connector (see
Figure 9) to use STO function
M4 x 12 DIN6900-3-Combi-Delta-Tx
screw
10 Screws for control cable clamps
M1-3 Cable clamp 5 Clamping control cables
M4 x 12 DIN6900-3-Combi-Delta-Tx
screw
6 Screws for power cable clamps
M32 Cable clamp 3 Clamping power cables
‘Product modified’ sticker 1 Information about modifications
HMI cap
*
*. Provided only if the drive is delivered with the keypad.
1 Closing cap for the HMI connector
Table 7. Content of accessory bag, MM6.
Item Quantity Purpose
STO terminal connector 1
Six pin black connector (see
Figure 9) to use STO function
M4 x 12 DIN6900-3-Combi-Delta-Tx
screw
10 Screws for control cable clamps
M1-3 Cable clamp 5 Clamping control cables
M4 x 25 DIN6900-3-Combi-Delta-Tx
screw
6 Screws for power cable clamps
M40 Cable clamp 3 Clamping power cables
‘Product modified’ sticker 1 Information about modifications
HMI cap
*
*. Provided only if the drive is delivered with the keypad mounted.
1 Closing cap for the HMI connector

Vacon 100 X Specifications

General

Brand	Vacon
Model	100 X
Category	Controller
Language	English