Vacon 100 X Installation, Technical And Maintenance Manual

4
vacon • 36 Power cabling
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
4.4.2 Cable and fuse sizes, frames MM4 to MM6, North America
The recommended fuse type is class T (UL & CSA). The fuse voltage rating must be selected accord-
ing to the supply network. The final selection must be made according to local regulations, cable
installation conditions and cable specification. Bigger fuses than those recommended below must-
not be used.
Check that the fuse operating time is less than 0.4 seconds. Operating time depends on used fuse
type and impedance of the supply circuit. Consult the factory about faster fuses. VACON
®
also rec-
ommends high speed J (UL & CSA) fuse ranges.
The cable dimensioning is based on the criteria of the Underwriters’ Laboratories UL508C:Cables must be
PVC-isolated; Max ambient temperature +40 °C (104 °F), max temperature of cable surface +70/+75 °C (158/
167 °F); Use only cables with concentric copper shield; Max number of parallel cables is 9.
When using cables in parallel, NOTE HOWEVER that the requirements of both the cross-sectional area and
the max number of cables must be observed.
Table 17. Cable and fuse sizes for
VACON
®
100 X.
Enclosure
size
Type
I
INPUT
[A]
Fuse
(class T)
[A]
Mains and
motor cable
Cu
Terminal cable size
Main terminal Earth terminal
MM4
0003 4 - 0004 4
0003 5 - 0004 5
3.4 - 4.6 6
AWG14 AWG24-AWG10
AWG17-AWG10
M4
ring terminal
0007 2 - 0008 2
0005 4 - 0008 4
0005 5 - 0008 5
6.0 - 7.2
5.4 - 8.1
10
AWG14 AWG24-AWG10
AWG17-AWG10
M4
ring terminal
0011 2
0009 4
0009 5
9.7
9.3
15
AWG14 AWG24-AWG10
AWG17-AWG10
M4
ring terminal
0012 2
0012 4
0012 5
10.9
11.3
20
AWG14 AWG24-AWG10
AWG17-AWG10
M4
ring terminal
MM5
0018 2
0016 4
0016 5
16.1
15.4
25
AWG10 AWG20-AWG5
AWG17-AWG8
M5
ring terminal
0024 2
0023 4
0023 5
21.7
21.3
30
AWG10 AWG20-AWG5
AWG17-AWG8
M5
ring terminal
0031 2
0031 4
0031 5
27.7
28.4
40
AWG8 AWG20-AWG5
AWG17-AWG8
M5
ring terminal
MM6
0038 4
0038 5
36.7 50
AWG4
AWG13-AWG0
M6 ring terminal
AWG13-AWG2
M6
ring terminal
0048 2
0046 4
0046 5
43.8
43.6
60
AWG4
AWG13-AWG0
M6
ring terminal
AWG13-AWG2
M6 ring terminal
0062 2
0061 4
0061 5
57.0
58.2
80
AWG4
AWG13-AWG0
M6
ring terminal
AWG13-AWG2
M6 ring terminal
0072 4
0072 5
67.5 100
AWG2
AWG9-AWG2/0
M6
ring terminal
AWG9-AWG2/0
M6 ring terminal

Vacon 100 X Specifications

General

Brand	Vacon
Model	100 X
Category	Controller
Language	English