Vacon NX User Manual

7
vacon • 132 Control keypad
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
7.3.6.3 Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another or to store parameter sets in the internal memory of the AC drive. All the
parameter groups are first uploaded to the keypad, then the keypad is connected to another drive
and then the parameter groups are downloaded to it (or possibly back to the same drive).
Before any parameters can successfully be copied from one drive to another the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The VACON
®
NX AC drive features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in
the application).
On Parameter sets page (S6.3.1), push the Menu button right to enter the Edit menu. The text
LoadFactDef begins to blink and you can confirm the loading of factory defaults by pushing the
Enter button. The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the Browser buttons.
Confirm with the Enter button. Wait until 'OK' appears on the display.
Figure 70. Storing and loading of parameter sets
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the To keypad page (S6.3.2) from the Parameter copy menu. Push the Menu button right to
enter the edit mode. Use the Browser buttons to select the option All parameters and press the
Enter button. Wait until 'OK' appears on the display.
READY
READY
enter
READY READY
OK
Parameter sets
Select
Parameter sets
CANCEL
CONFIRM
Parameter sets
Wait...
Parameter sets
LoadFactDef
11384_uk

Vacon NX Specifications

General

Product Type	AC Drive
Control Method	Scalar Control
Enclosure	IP00, IP21
Communication	Ethernet
Safety	STO (Safe Torque Off)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Ambient Temperature Range	-10°C to +50°C (with derating above +40°C)
Cooling Method	Air-cooled, Liquid-cooled