Control keypad vacon • 139
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
7
Total counters (S6.8.1)
In the Total counters page (S6.8.1) you can find information related to the AC drive operation times,
i.e. the total numbers of MWh, operation days and operation hours passed so far. Unlike the
counters in the Trip counters, these counters cannot be reset.
NOTE! The Power On time counter (days and hours) runs always, when the power is on.
Trip counters (S6.8.)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero. You
have the following resettable counters at your disposal. See Table 54 for examples.
NOTE! The trip counters run only when the motor is running.
The counters can be reset on pages 6.8.2.2 (Clear MWh counter) and 6.8.2.5 (Clear Operation time
counter).
Example: When you want to reset the operation counters you should do the following:
Figure 81. Counter reset
Table 54. Counter pages
Page Counter Example
C6.8.1.1. MWh counter
C6.8.1.2. Power On day counter
Value on display is 1.013. The drive has operated for
1 year and 13 days.
C6.8.1.3. Power On hour counter
Value on display is 7:05:16. The drive has operated
for 7 hours 5 minutes and 16 seconds.
Table 55. Resettable counters
Page Counter
T6.8.2.1 MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
To Next Page
Loading...
Need help?
General
