The display can be mounted in dierent ways depending on where it is installed:
• The display can be easily mounted on a standard IEC panel with a 138 × 138 mm
aperture size and a 144 × 144 mm face size.
• The display can be mounted on a panel, desktop, or wall using the display stand
included as standard.
2.2 Safety
This product has been tested for safety. Note the following precautions:
Do not replace the battery with a battery of an incorrect type. If you do,
there is a risk of explosion. Dispose of used batteries according to statutory regulations.
WARNING!
Make sure that you prepare or connect only de-energized wires.WARNING!
Improper modification can damage the product or lead to malfunction. Any
modification voids your warranty.
CAUTION!
Do not apply detergent or water directly onto the screen. It may drip inside
the display and damage the device.
CAUTION!
2.2.1 ESD protection
Electrostatic Discharge (ESD) can damage electronic circuits. Vaisala products are
adequately protected against ESD for their intended use. However, it is possible to damage
the product by delivering electrostatic discharges when touching, removing, or inserting any
objects in the equipment housing.
To avoid delivering high static voltages to the product:
• Handle ESD‑sensitive components on a properly grounded and protected ESD
workbench or by grounding yourself to the equipment chassis with a wrist strap and a
resistive connection cord.
• If you are unable to take either precaution, touch a conductive part of the equipment
chassis with your other hand before touching ESD‑sensitive components.
• Hold component boards by the edges and avoid touching component contacts.
WID511 User Guide M211109EN-L
10
To Next Page
Loading...
Need help?
General
