Vaisala AviMet WID511 - Data Page and Message Configuration

7.11 Switching between DHCP and static
addressing
1. Enter Maintenance mode.
2. On the Advanced settings page, press Network.
3. On the Network settings page, press Switch to DHCP or Switch to static.
7.12 Viewing network status
1. Enter Maintenance mode.
2. On the Advanced settings page, press Network.
3. On the Network settings page, press Get network status.
7.13 Selecting displayed data pages
You can select which of the available data pages are displayed.
1. Enter Maintenance mode.
2. On the Advanced settings page, press Page selection.
WID511 User Guide M211109EN-L
66