Vaisala AviMet WID511 - Exporting and Importing Configuration Files

Using the advanced settings in the Maintenance mode, you can change the configuration
parameters, for example communication settings. The changes are saved in the
configuration file that is located in the display memory.
You can copy the configuration for backup purposes, or download the configuration from
one display to another, by using the USB Flash memory stick.
Use only the USB Flash memory stick for importing and exporting display
configuration files.
CAUTION!
Always take a backup copy of the current configuration before making changes in the
configuration file.
More information
‣
Installation safety (page 14)
‣
Introduction to advanced settings (page 53)
‣
Exporting configuration files to USB Flash memory (page 57)
‣
Importing configuration files from USB Flash memory (page 60)
7.7
Exporting configuration files to USB
Flash memory
To copy the current display configuration, for example, for backup purposes, export the
configuration file.
Chapter 7 – Advanced settings in Maintenance mode
57