Figure 2 WID511 data flow, serial connection (default)
Figure 3 WID511 data flow, ethernet connection (when configured)
More information
‣
Selecting messages in use (page 67)
3.3
Interfaces
The display has the following customer interfaces behind the back cover:
• RS‑485/RS‑422/RS‑232 ports for serial connection: The default interfaces for Vaisala
sensors.
• Ethernet port: If configured, an alternative interface for receiving data from an external
sending unit.
The display also has a USB host interface for USB Flash memory for importing or exporting
display configuration files with a USB Flash memory. The USB host interface is located
behind the front cover.
More information
‣
Exporting configuration files to USB Flash memory (page 57)
‣
Importing configuration files from USB Flash memory (page 60)
Chapter 3 – Functional description
13
To Next Page
Loading...
