4. Insert the USB Flash memory in the USB port.
1 SD card interface (not in use)
2 USB port for exporting and importing configuration files with USB Flash memory
3 USB port for computers (for Vaisala use only)
5. Press Refresh.
The Configurations page displays a list of the configurations available in the USB Flash
memory.
6. To export the current configuration file that the display uses to the USB Flash memory,
press Export.
After a successful export the list is updated with the exported configuration.
7. Remove the USB Flash memory.
Chapter 7 – Advanced settings in Maintenance mode
59
To Next Page
Loading...
