Vaisala GMP252 - Table 50 Inputs and Outputs

Property Description/Value
Connector type M12 5-pin male
IP rating, probe body IP65
Materials
Probe housing material PBT plastic
Filter PTFE
Connector Nickel plated brass
Dimensions
Probe diameter 25 mm (0.98 in)
Probe length 130 mm (5.12 in)
Table 50 Inputs and Outputs
Property Description/Value
Digital output Over RS-485:
• Modbus
• Vaisala Industrial Protocol
Analog output • 0 ... 5/10 V (scalable), min load 10 kΩ
• 0/4 ... 20 mA (scalable), max load 500 Ω
Operating voltage
With digital output in use 12 ... 30 VDC
With voltage output in use 12 ... 30 VDC
With current output in use 20 ... 30 VDC
Power consumption
Typical (continuous operation) 0.4 W
Maximum 0.5 W
When connected to Indigo 200 transmitter
Analog output 3 voltage (V) or current (mA) outputs:
• 0 … 10 VDC / 0 … 5 VDC / 0 … 1 VDC / 1 … 5 VDC
(min load 1kΩ)
• 0 … 20 mA / 4 … 20 mA (max load 500 Ω)
Relays 2 configurable relays
Power supply input Nominal 24 V, range:
• 15 ... 40 VDC
• 20 ... 28 VAC
Power consumption Max. 3.5 W (transmitter + probe total max.
consumption)
Chapter 11 – Technical Data
105