Syntax Description
addr [aaa]<cr>
Set new device address. aaa = address, 0 ... 254
(default = 240)
Example (shows 0 as current address, enter 5 as the new address):
addr
Address : 0
addr 5
Address : 5
Table 17 Close Command
Syntax Description
close<cr> Close the connection that was opened with the open
command.
Example:
close
line closed
Table 18 Form Command
Syntax Description
form<cr>
Show the currently used measurement format.
form /<cr>
Reset measurement format to default.
form [sss]<cr>
Set a new measurement format.
sss = String consisting of modifiers and
abbreviations for measured parameters.
See Table 19 on the facing page and Table 20 on the
facing page.
Maximum length is 150 characters. Maximum length
may be shorter when text strings are used.
Chapter 4 – Vaisala Industrial Protocol
37
To Next Page
Loading...
