Vaisala GMP252 User Manual

7.6 Wireless Interface Menus
1
2
3
4
5
Figure 20 Wireless Configuration Interface, Desktop Browser View
1 Measurements: displays the measurement data of the connected probe
2 Status: contains information about the status of Indigo and the connected probe (for
example, notifications and alarms)
3 Calibration: calibrate and adjust probes using references. Available options (for
example, adjustment points) vary depending on the probe model.
4 Settings: contains options for configuring the connection and display settings, outputs,
relays, probe-specific settings, and general device preferences
• General submenu: device information and general settings, wireless connection
and display settings
• Outputs submenu: options for configuring analog or digital outputs (depending
on transmitter model).
• Relays submenu: settings for controlling relays A and B
• Probe submenu:
probe-specific settings such as environmental compensations
and
filtering factor
5 Main display area for menus and measurement information (desktop browser example)
For more information on the configuration options available in Indigo transmitters, see the
User Guide of your transmitter.
GMP252 User Guide M211897EN-D
70

Vaisala GMP252 Specifications

General

Resolution (Temperature)	0.01 °C
Measurement Range (Humidity)	0 to 100 %RH
Protection Class	IP65
Measurement Range (Temperature)	-40 to +60 °C
Accuracy (Temperature)	±0.2 °C
Accuracy (Humidity)	±0.8 %RH (0 ... 90 %RH)
Output	4 to 20 mA
Sensor	humidity sensor and thermistor
Response Time	15 s
Communication	RS485