Vaisala GMP252 - Table 19 Output Parameters for Form Command; Table 20 Modifiers for Form Command

Syntax Description
Example (set output format as CO
2
ppm, with start of text (ASCII character 002) and end of text (003) ASCII
codes, and without line feed and carriage return at the end):
form #002 6.0 "CO2=" CO2 " " U3 #003
OK
Output example (continuous output from RUN mode, ASCII codes not visible here):
CO2= 866 ppm CO2= 866 ppm CO2= 867 ppm CO2= 867 ppm
CO2= 867 ppm CO2= 868 ppm CO2= 868 ppm CO2= 869 ppm
...
Table 19 Output Parameters for Form Command
Output Parameter Abbreviation in Form Command
Carbon dioxide in ppm
co2
Carbon dioxide in percent
co2%
Currently used temperature compensation value
tcomp
Currently used pressure compensation value
pcomp
Currently used oxygen concentration compensation
value
o2comp
Currently used relative humidity compensation value
rhcomp
Table 20 Modifiers for Form Command
Modifier Description
x.y
Length modifier (number of digits and decimal
places).
#t
Tabulator.
#r
Carriage-return.
#n
Line feed.
""
String constant, length 1 ... 15 characters.
#xxx
ASCII code value (decimal) of a special character; for
example, #027 for ESC.
addr
Probe address (0 ... 254).
sn
Probe serial number.
time
Cumulative operating hours of the probe.
Chapter 4 – Vaisala Industrial Protocol
39