Vaisala GMP252 - Configuring Analog Outputs with Indigo 201; Figure 21 Indigo 201 Analog Output Configuration Options

7.7 Configuring Analog Outputs with
Indigo 201
Indigo 201 analog output transmitters have 3 analog current (mA) or voltage (V) outputs.
Each analog output has the same set of configuration options (analog output 1 shown in
example).
Note that you must select either the current or voltage output mode: using both current and
voltage outputs is not possible.
When you enter a value into a field, the value is saved automatically when you exit the
input field (for example, tap on an area outside of the field).
Figure 21 Indigo 201 Analog Output Configuration Options
For detailed instructions on
configuring analog outputs in the Indigo 201 wireless
configuration interface, see Indigo 201 Analog Output Transmitter User Guide.
Chapter 7 – Using GMP252 with Indigo Transmitters
71