Vaisala IRIS - Scheduling Products; Product Scheduler Menu; Figure 42 Product Scheduler

4. Scheduling Products
4.1 Product Scheduler Menu
The Product Scheduler menu tells IRIS when to generate a product for automatic or manual
operation.
Because the product generation aects host computer resources, this menu can be viewed
but not controlled by an IRIS observer.
Figure 42 Product Scheduler
Site column
Shows the site for each scheduled product. A product runs only if data from that site
comes to IRIS, either from the radar, over the network, or from a tape.
If the Display field is set to Master (the Master Schedule), there is only one product
entry, regardless of the number of sites scheduled.
Right-click the mouse to show a menu on the site column listing all sites with a *
symbol next to each site for which the product is scheduled.
Select an entry to add or remove the * tag. This makes the Master Schedule
convenient to use for adding or deleting sites from the schedule.
Product column
Shows the name of the product.
Data column
Shows the data parameter configured for the product.
Task column
Shows the name of the associated task.
Chapter 4 – Scheduling Products
RESTRICTED 113