Resolution
The product-specific parameters for Cartesian products include the horizontal resolution of
the product in pixels. For 3-D products, the vertical resolution is also listed, for example,
480×10.
The product output process always generates a display even if the output resolution does
not match your display capabilities. It does this by skipping or duplicating pixels as required.
For example, if you send a low resolution display to a medium resolution display device,
such as a printer, the Product Output process duplicates each pixel to zoom the image on
the printer to full size.
TASK
The name of the associated task.
Time
The date and time (local time) when the product data was collected.
Request
Use the Request field to request product output. Position the mouse cursor over an entry in
the product list and select Send.
The menu shown depends on the entry you select in the list.
If you select a header line from the list, you can choose to send all or only the next
occurrence of the product to the output device. You can also select particular sites that you
want to receive the output. Each site you select is marked with an asterisk.
After you issue the Send request, the Request field displays a message indicating the status
of the request.
7.4
Sending a Product to a Device
You can send one or more existing products to a network device, or one or more future
products to a network device at one or more sites.
IRIS Product and Display User Guide M211319EN-H
266 RESTRICTED
To Next Page
Loading...