6.17.7 WARN Output Options
Figure 93 WARN Output Options
IRIS WARN centroids are displayed as an ellipse with a name inside or as a graphical icon
rotated to the direction of motion of the centroid.
Centroid Label
The Centroid Label options are for a second label line on ellipses or for a label to the right of
the icon.
The WARN centroid has 4 label choices. The data displayed is from the first of the 3 possible
inputs to the warning. The units are the same as in a standard IRIS data display, except that
wind shear is displayed as knots loss/gain, and height is displayed in kilofeet.
None
No additional label.
Maximum
The centroid is labeled with the maximum value of the data throughout the centroid.
Average
The centroid is labeled with the average value of the data throughout the centroid.
Speed
The centroid is labeled with the speed of a target. This only applies to systems that
have the DWELL product configured for target detection.
Centroid Fill
The Centroid Fill options apply to ellipse-style displays when the WARN product is overlaid
on other products.
You can choose the style for the fill eect of the centroid so that it can be clearly identified
on your display. The options are:
Open
The centroid area is not filled, it is outlined.
Hatched
The centroid area is filled with a slanted pattern of lines.
IRIS Product and Display User Guide M211319EN-H
256 RESTRICTED
To Next Page
Loading...