Vaisala IRIS - Example of 15-Tilt Volume Scan

0
5
10
10 20 30 40 50
44.9
34.9 26.5
18.3 13.9
11.1 9.3
7.4
6.4
5.5
4.6
3.6
2.7
1.7
0.8
Figure 8 Example of 15-tilt Volume Scan
Figure 9 LAYER Configuration Example
1. Select Type > LAYER.
2. In Data:Display, select the type of data that is computed.
• To compute VIL Density data, select one of the following:
• dBT:VILDen
• dBZ:VILDen
• dBZc:VILDen
• To compute a layer average, select any other data type.
3. In Layer Top and Layer Bottom, select the top and bottom heights of the layer in
kilometers and tenths of kilometers.
IRIS Product and Display User Guide M211319EN-H
42 RESTRICTED