C.2 Installing IRIS 3DView
It is not necessary for IRIS software to be installed on the system to use 3DView.
If you chose to have the IRIS software on the same system, it is recommended that you
install the IRIS software before installing the IRIS 3D View.
IRIS 3DView software is a separately licensed software package that renders 3D
visualizations of IRIS format radar data.
You can install the IRIS 3DView either on an IRIS Analysis machine, or a machine without
IRIS.
1. Obtain the following RPMs:
• libogg-devel-1.1.4-2.1.el6.i686.rpm
• libtheora-devel-1.1.0-2.el6.i686.rpm
• qtwebkit-2.1.1-1.el6.i686.rpm
• qt-mobility-1.1.3-2.el6.i686.rpm
• gl2ps-1.3.5-1.el6.i686.rpm
• gl2ps-devel-1.3.5-1.el6.i686.rpm
• compat-expat1-1.95.8-8.el6.i686.rpm
• expat-2.0.1-9.1.el6.i686.rpm
• expat-devel-2.0.1-9.1.el6.i686.rpm
• xorg-x11-apps-7.4-10.el6.i686.rpm
• xorg-x11-server-common.1.7.7-29.el6.i686.rpm
• xorg-x11-server-Xvfb-1.7.7-29.el6.i686.rpm
• vtk-5.8.0-6.el6.i686.rpm
• vtk-devel-5.8.0-6.el6.i686.rpm
• vtk-java-5.8.0-6.el6.i686.rpm
• vtk-python-5.8.0-6.el6.i686.rpm
• vtk-qt-5.8.0-6.el6.i686.rpm
• vtk-tcl-5.8.0-6.el6.i686.rpm
• acroread-9.4.0-1.el6.i686.rpm
• acroread-plugin-9.4.0-1.el6.i686.rpm
2. Install the RPMs in the following order:
a. #rpm -Uvh libogg-devel-1.1.4-2.1.el6.i686.rpm
b. #rpm -Uvh libtheora-devel-1.1.0-2.el6.i686.rpm
c. #rpm -Uvh qtwebkit-2.1.1-1.el6.i686.rpm
d. #rpm -Uvh qt-mobility-1.1.3-2.el6.i686.rpm
e. #rpm -Uvh gl2ps-1.3*
f. #rpm -Uvh compat-expat1-1.95.8-8.el6.i686.rpm
g. #rpm -Uvh expat-2*
h. #rpm -Uvh xorg-x11*
i. #rpm -Uvh vtk*
j. #rpm -Uvh acroread-9*
3. Log in as root.
Appendix C – IRIS 3DView
RESTRICTED 313
To Next Page
Loading...