Vaisala IRIS - IRIS 3 Dview in System Architecture; Figure 105 IRIS 3 Dview User Interface

Figure 105 IRIS 3DView User Interface
C.1.1
IRIS 3DView in System Architecture
The IRIS 3DView package fits in the IRIS system architecture as shown in the following
figure.
Generally, there is an IRIS/ Radar package running the IRIS software at a remote radar site
(or perhaps there are multiple remote radar sites).
Raw radar base data are fed from the radar sites to a central server computer running IRIS/
Analysis software generating many 2D radar products. These products may be viewed
directly on this central server computer, or re-distributed to other client computers running
the IRIS/Display software package. For 3D functions, the central server computer outputs
radar products over the network to the IRIS 3DView workstation. The IRIS 3DView computer
receives these data and displays it in the 3D rendering window.
At the 3D rendering window, the operator may manipulate the data by rotating, panning,
zooming, and so on.
Appendix C – IRIS 3DView
RESTRICTED 311